新聞中心

【螺桿式冷水機】螺桿式冷水機的配置注意事項！

來源：深圳市辛普森制冷技術有限公司發布時間：2021-05-18 瀏覽：1043 次

　　關于螺桿式冷水機組到達用戶現場后，需將電源線接到機組控制柜。控制室的入口位于控制室上方。機組控制柜電源進線必須高于機組1米，并且控制柜不能有壓力。接線端子R,S,T,N的動力線在第一次24小時運行后（允許的最短時間）需要重新固定接線端子。

　　除螺桿式冷水機組自身控制電源箱外，還需要與水泵、水塔風機電控柜配套使用，電控柜電源部分包括：總電源連接銅排，Y-Δ壓縮機啟動電器。

　　國內標準的螺桿冷水機組工作電源是3N~AC380V,50Hz。外部電源應符合機組的電氣特性，確保機組的使用壽命，電源電壓偏差最好不超過5%，總電源應通過冷水機組電控柜背面上部穿線孔接入，并與銅排或端子排接合，完成電源接線。

　　所有供電線路的安裝應符合國家電氣規范的要求。

　　五、螺桿式冷水機組控制柜電源電源線的規格應根據銘牌上的額定電流選擇。電力系統的總功率配置要有一定的余量，推薦值為機組、泵和水塔參數的1.25~1.3倍。電力電纜（電線）應比冷水機組的最大運行電流稍大，并應考慮工作環境的影響。電氣控制箱內備有接地線和自動斷路措施，用戶自備的電源必須與之配套。對于大電流機組，應采用雙路電源供電，但雙路電源的線徑必須相等，且同品牌產品。

　　以上就是小編幫大家整理的內容，希望能幫助到您，更多的請關注我們官網新聞！